Capabilities & Equipment
Material of Construction
| Carbon and Chrome Moly | up to 2.5in thick |
| Stainless Steel and Alloy Clad | up to 1.5in thick |
| Nickel Alloy | up to 1in thick |
Typical Size Capabilities
| Diameters | up to 168in |
| Weights | up to 100 tons |
| Tube Bundle Diameter | up to 120in |
| Overall Lengths | up to 160ft |
Codes and Qualifications
| ISO 9001:2008 | Registered by SAI Global |
| ASME SECT VIII Div 1 | "U" Stamp and National Board "R" Authorisation |
| ASME SECT I | "S" Stamp |
Shop Equipment
Machine Shop
| Union Horizontal | 4 axis CNC control - X=207in Y=98in Z=39in, 5in dia spindle |
| Toshiba TUE-15 | CNC boring mill - maximum height = 67in, maximum dia = 70in |
| TOS | Horizontal boring mill - X=63in Y=44in Z=49in, 4in dia spindle |
| New Century | CNC Vertical boring mill - 89in diameter swing, 72in under rail |
| Mazak | CNC VMC - X=40in Y=20in Z=30in 4 axis |
| Poreba | Engine Lathe - 53in swing (65in in gap) × 315in ctrs |
| Okuma | CNC Model LH50-NBD - 36in swing, 20in over cross slide 160in ctrs |
| Nakamura - Tome | CNC Slant bed -14in × 20in swing |
| Doosan Horizontal | CNC HBM - X=100in Y=78in Z=60in |
| Nakamura - Tome | CNC Slant bed -14in × 20in swing |
| Manual Machines | Lathes, Milling machines, Radial arm drills |
Fabrication Shop
| Plasma Cutting Unit | MG CNC gantry cutting machine - 45ft × 12ft table Plasma cutting up to 2in Stainless Steel Oxy fuel cutting up to 4in Carbon Steel |
| Plate Rolling | 1¼in thick × 120in long |
| Tank Rolls | up to 300 ton capacity |
| Weld Positioners | up to 10 ton capacity |
| Welding Machines | SAW / SMAW / GTAW / GMAW / FCAW |
| Vibratory Stress Relieving | Portable vibratory unit for stress relieving and weld conditioning |
| Thermal Stress Relieving | Top loading oven to 1200° F. 4ft-0in × 5ft-0in × 13ft-0in long |
Quality Control and Testing Procedures
| Hydrotest | up to 10,000 psig |
| Pneumatic Test | up to 25 psig |
| NDE | LPI, UT, Hardness, MPI (wet & dry) |
In House Finishing Process
| Glass beading, shot and sandblasting | 7000 sq ft fully enclosed facility |
| Painting | Commonly used industrial paint systems |
| Stainless Steel Passivating | Environmentally friendly products |
Testing Facilities through Sub-Contracts
| Heat Treatment | Stress Relieving Oven - 19ft wide × 19ft high × 50ft long |
| Balancing | Static and Dynamic |
| NDE | Radiography, chemical analysis, PMI |
| Plate Forming | up to 2in thick |